BFRQM - H-251, THINNER
- MSDS: BFRQM
- Manufacturer: SARAN PROTECTIVE COATINGS CO
- Product Name: H-251, THINNER
- National Stock Number: 8010-00-831-5935
Product Identification
Product ID:H-251, THINNER
MSDS Date:01/15/1987
FSC:8010
NIIN:00-831-5935
MSDS Number: BFRQM
Responsible Party
DETROIT, MI 48212
Emergency Phone: 313-368-4900
Info Phone: 313-368-4900
Cage: 11931
Contractor
Cage: 11931
Ingredients
2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 50%
OSHA PEL S,100 PPM
ACGIH TLV: S, 5 PPM; 9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 25 - 30%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 25%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATION TO SKIN, EYES, AND
RESPIRATORY SYSTEM WHEN OVEREXPOSED.
Effects of Overexposure:IRRITATION TO SKIN, EYES, AND RESPIRATORY
SYSTEM WHEN OVEREXPOSED.
Medical Cond Aggravated by Exposure:PULMONARY DISORDERS
First Aid
First Aid:INHALATION: FRESH AIR AND TREATMENT FOR EFFECT OF
SOLVENTS-CONTACT PHYSICIAN. EYES: FLUSH 10 MINUTES WITH CLEAN COOL
WATER-CONSULT EYE PHYSICIAN. SKIN: WASH WITH MILD SOAP AND CLEAN
WATER. INGESTION: DO NOT INDUCE VOMITING-CONSULT PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:48F,8.8C
Autoignition Temp:Autoignition Temp Text:997F
Lower Limits:1.2
Upper Limits:7.1
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRE IN CONFINED AREA.
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR AND MAY TRAVEL
ALONG THE GROUND. ELIMINATE ALL IGNITION SOURCES.
Accidental Release
Spill Release Procedures:DIKE AREA TO CONTAIN MATERIAL, PUMP INTO
PROPER WASTE CONTAINER. CLEAN AREA WITH OIL ABSORBENCY MATERIAL.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:DO NOT EXPOSE TO TEMPERATURE IN EXCESS
OF 120F.
Other Precautions:KEEP AWAY FROM SOURCES OF IGNITION OR OPEN FLAME.
Exposure Controls
Respiratory Protection:NIOSH/MSHA SELF CONTAINED BREATHING APPARATUS.
Ventilation:MECHANICAL (GENERAL): 60 FT./MIN. VENTILATION LOCAL: 20
FT./MIN.
Protective Gloves:NITRILE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING, RUBBER BOOTS
Work Hygienic Practices:AFTER USE, WASH SKIN WITH MILD SOAP AND WATER.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:200F,93C
Vapor Pres:25
Vapor Density:3.2
Spec Gravity:0.92
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR COLORLESS LIQUID, PLEASANT SWEET ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
HYDROCARBON PRODUCTS.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE FEDERAL,
STATE AND LOCAL REGULATIONS FOR FLAMMABLE ORGANIC SOLVENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.